Barrow Mix – Product Data
About our concrete
Barrow-mixed concrete is designed to enable the user to cast material into the required shape prior to hardening.
Physical and Chemical Characteristics
Barrow-mixed concrete is a mixture of:
- A cementitious material (this may be cement or a mixture of cement with pulverised fuel, ash or ground granulated blast-furnace slag silica fume)
- Fine and coarse aggregate
- Admixtures or additives may be added to improve the properties of the fresh and hardened concrete
The resultant mixture is abrasive and alkaline
Contact with wet cement mixes such as concrete can cause skin diseases:
- Irritant-contact dermatitis is caused by the combination of the wetness, alkalinity and abrasiveness of the cement mixture.
- Allergic~contact dermatitis may be caused by individual sensitivity to chromium compounds which may occur in cement
Cement burns, a form of skin ulceration, may result from freshly mixed concrete.
Direct skin contact with wet concrete should be avoided. It is also important not to kneel or sit on the wet material as harmful contact can occur through saturated clothing.
Protective clothing should be worn when handling wet concrete, particularly on the arms, hands, legs and feet e.g. long-sleeved clothing and gloves with full-length trousers and impervious boots.
Transportation and Waste Disposal
The carriage of concrete is not subject to hazardous substance conveyance regulations and vehicle labelling is not required in the event of spillage, entry of material to water courses should be avoided.
Where skin contact occurs with wet concrete, either directly or through saturated clothing, the concrete must be washed off immediately. Where eye contact occurs the area must be immediately and thoroughly irrigated with water. In all cases of doubt where symptoms persist, medical advice should be obtained.
Hardened Concrete Hazard
The surface treatment and cutting of hardened concrete can create dust which may contain quartz. If inhaled in excessive quantities over extended periods respirable dust containing quartz can constitute a long-term health hazard.
Inhalation of concrete dust should be avoided.
Respiratory protective equipment should be worn during the surface treatment or cutting of hardened concrete where dust is generated.
Unused hardened concrete is inert, but should be disposed of in accordance with local legal requirements.
Whatever your project – large or small, night or day – why not get in touch with our expert team for further information on concrete deliveries from Precision Poured Concrete?
- Email us using moc.etercnocderuopnoisicerp@ofni
- Use the contact form on the right
- Or call our expert team today on 01706 655245
We’ll be delighted to help!